Omron V680S Series User Manual Download Page 82

Page: 82 / 344

Sec

tion 4

lat
io

RFID System

User's Manual
(Modbus TCP)

Section 4
Installation and Connections

RF Tag



V680-D1KP54T

Either use the V700-A80 Attachment to mount the RF Tags with screws or permanently attach the RF

Tags with adhesive.

Installation with the V700-A80 Attachment

Place the V680-D1KP54T RF Tag in the Attachment.

The V680-D1KP54T RF Tag can be placed in the Attachment in either direction.

The direction does not affect operation.

Do not repeatedly place the RF Tag in the Attachment and remove it from the Attachment. If you do so, the RF Tag will

become loose or the Attachment will be damaged.

If you must remove an RF Tag from the Attachment, insert a flat-blade screwdriver in the gap under the RF Tag. Do not

try to remove it with your bare hands. Doing so may result in injury.

Mount the Attachment with M3 screws.

Tighten the screws to a suitable torque.

Tightening torque: 0.3 to 0.5 N·m



Installation with Adhesive

Select an adhesive that is suitable for the materials. Use the correct application method and amount.

Always confirm that the RF Tag is securely attached before you use it.

The RF Tags are made from PPS resin. We recommend epoxy adhesives to mount them on metal or

hard plastic.

The epoxy adhesives that are listed in the following table are recommended for the given temperature

ranges.

The above adhesives may not provide sufficient strength when attaching RF Tags to polyethylene, polypropylene,

fluororesins, or silicon-based resins. Check applicability carefully in advance. Consult with the manufacturer for detailed

information on adhesives.

Ambient operating

temperature

Product name

Manufacturer

-40 to 70

Two-part Epoxy Adhesive:
TB2001 (main agent)/TB2105C (curing agent)

ThreeBond Co., Ltd.

One-part Moisture-curing Elastic Adhesive:
TB1530

ThreeBond Co., Ltd.

-40 to 110

Two-part Epoxy Adhesive:
EP001

Cemedine Co. Ltd.

-40 to 150

One-part Epoxy Adhesive:
TB2285

ThreeBond Co., Ltd.

Two-part Epoxy Adhesive:
TB2087

ThreeBond Co., Ltd.

M3 flat-head scre

nting Hole Dimensions

±0.2

o, M3 holes

Summary of Contents for V680S Series

























































































































































































































































































































































Search results

Summary of Contents for V680S Series

Reviews:

Brands by name

Popular brands

Omron V680S Series, User Manual

Search results

Summary of Contents for V680S Series

Reviews:

Brands by name

Popular brands