Omron V670 Series, User Manual

Page: 47 / 143

3-1 Controller
3-7
3-1-3 How to Install
The controller can be installed in a panel with screws or on a DIN rail.
♦
Installation in a panel
If you install the controller in a panel, be sure to use spring washers, flat washers and M4 screws. (Tightening torque: 1.2 N•m or less)
Do not use any organic solvent such as lock paint to fix screws. Otherwise, the case may crack.
♦
Installation on a DIN rail
(Unit: mm)
• When you install the controller on the DIN rail, hook the
controller over the A and push the controller in the direc-
tion B.
•
When you remove the controller from the DIN rail, pull
the hook downward and remove the controller pushing
slightly upward.
Recommendable DIN rail
Model PFP-100N2 (Rail
length 1 m)
(OMRON)
MAX.90
DIN Rail
End Plate Hook
V 6 7 0 - C D 1 D
V670-CD1D
ID
Support Rail
Model PFP-100N2
End Plate
Model PFP-M
(Unit: mm)