Omron V670 Series, User Manual

Page: 116 / 143

7-5 Functions
7-14
7-5-6-2 Reading Again
When you press the key again after reading the content of tag, you can read the data again according to the specified start address
and end address. When you press or , the start address value and end address value increase or decrease one. Then, the data
is read again.
Set the start address to 10h and the end
address to 1Fh.
When you press
the
key, a data is read out of
the tag and a maximum of 4 bytes of data beginning
with the specified start address is displayed.
When you press the key, the start address
value increases one. Then, 4 bytes of data from the
start address is shown.
When you press the
key
, a data is read out of
the tag again.
When you press the key, the start address
value and end address value increase one and the
data is read out of the tag again.
When you press the key, the start address
value and end address value decrease one and the
data is read out of the tag again.