Omron V670 Series, User Manual

Page: 118 / 143

7-5 Functions
7-16
7-5-7 Test
When you check the position of antenna and tag in an applicable communication mode, you can execute the communication in a test
operation to judge whether the location and relative speed are suitable or not.
7-5-7-1 Setting Communication Mode
When you execute the Test Reading and Test Writing, you need to specify a communication mode first.
7-5-7-2 Test Reading
7-5-7-3 Test Writing
Specify a communication mode. Using the
/ key(s) or the to keys,
change a communication mode to be displayed.
Decide with the keys.
Specify the Single Trigger mode as a communi-
cation mode.
Specify the start address and end address.
When you press the keys, the number of
repeats and a data of tag are displayed.
Specify Repeat Auto as a communication
mode.
Specify the start address, end address and data
to be written.
When you press the key, the number of
repeats and the result are displayed.