Omron Sysmac NX-series, User Manual

Page: 122 / 306

Area
I/O entry
mapping
name
Data name
Size
(Byte)
Data type
Regis-
tered by
default
*1
I/O entry
that
changes
accord-
ing to
Unit op-
eration
settings
Reference
Input Input Data
Set 3 Ch3 Status 2 WORD Yes Yes Ch £ Status on
page 7 - 7
Ch3 Trigger Input Time
Stamp 8 ULINT Yes Yes Ch £ Trigger Input
Time Stamp on
page 7 - 8
Ch3 Number of Samplings 2 UINT Yes Yes Ch £ Number of
Samplings on page
7 - 9
Ch3 Analog Input Value
1-10 20 ARRAY[0..9]
OF INT Yes Yes Ch £ Analog Input
Value on page
7 - 9
Ch3 Analog Input Value
11-20 20 ARRAY[0..9]
OF INT --- Yes
: : : : :
Ch3 Analog Input Value
991-1000 20 ARRAY[0..9]
OF INT --- Yes
Input Data
Set 4 Ch4 Status 2 WORD Yes Yes Ch £ Status on
page 7 - 7
Ch4 Trigger Input Time
Stamp 8 ULINT Yes Yes Ch £ Trigger Input
Time Stamp on
page 7 - 8
Ch4 Number of Samplings 2 UINT Yes Yes Ch £ Number of
Samplings on page
7 - 9
Ch4 Analog Input Value
1-10 20 ARRAY[0..9]
OF INT Yes Yes Ch £ Analog Input
Value on page
7 - 9
Ch4 Analog Input Value
11-20 20 ARRAY[0..9]
OF INT --- Yes
: : : : :
Ch4 Analog Input Value
991-1000 20 ARRAY[0..9]
OF INT --- Yes
Out-
put Output Data
Set 1 Ch1 Operation Command 2 WORD Yes Yes Ch £ Operation
Command on page
7 - 11
Output Data
Set 2 Ch2 Operation Command 2 WORD Yes Yes
Output Data
Set 3 Ch3 Operation Command 2 WORD Yes Yes
Output Data
Set 4 Ch4 Operation Command 2 WORD Yes Yes
*1. The I/O data items are registered as the factory settings.
7 I/O Data and List of Settings
7 - 4
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)