D I P S W I T C H E S
9
12
H-T40
M
-P Manual Rev.A
9 D
IP
S
WITCHES
9
All the dipswitches are preset by the factory. Please leave the dipswitches
in the default position.
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
ON
Table 9-1 Default Factory Position
10 C
ONNECTION
TO
THE
G9SP
10
1. Locate the included RS-232 cable with two DB9 connectors.
2. Connect the HMI side of the cable to the status display touchscreen
serial DB9 COM1 port.
3. Connect the G9SP side of the included RS-232 cable to the DB9
serial option board on the G9SP.
Note:Be sure to connect the cable to the appropriate ports. If the
cable is connected backwards, the unit will not perform as specified
and/or damage may result.
