No.17S138-00
56/58
STC-MBS881U3V / STC-MCS881U3V / STC-MBS122BU3V / STC-MCS122BU3V
Product Specifications and Use’s Guide
Name
Description
PixelCorrectionAllEnabled
Enable pixel correction for all pixels.
PixelCorrectionIndex
Determine index of targeted pixel for pixel correction.
PixelCorrectionEnabled
Determine if targeted pixel is enabled for pixel correction.
PixelCorrectionX
Determine x-coordinate of targeted pixel for pixel correction.
PixelCorrectionY
Determine y-coordinate of targeted pixel for pixel correction.
Name
Description
UserSetSelector
Selects the feature User Set to load, save or configure.
UserSetLoad
Loads the User Set specified by UserSetSelector to the device and makes it active.
UserSetSave
Save the User Set specified by UserSetSelector to the non-volatile memory of the
device.
UserSetDefault
Selects the feature User Set to load and make active by default when the device is reset.
Name
Description
ChunkModeActive
Activates the inclusion of Chunk data in the payload of the image.
ChunkSelector
Selects which Chunk to enable or control.
ChunkEnable
Enables the inclusion of the selected Chunk data in the payload of the image.
ChunkCounterSelector
Selects which counter to retrieve data from.
ChunkCounterValue
Returns the value of the selected Chunk counter at the time of the FrameStart event.
ChunkGainSelector
Selects which Gain to return.
ChunkGain
Returns the gain used to capture the image.
ChunkBlackLevelSelector
Selects which Black Level to return.
ChunkBlackLevel
Returns the black level used to capture the image included in the payload.
ChunkExposureTimeSelector
Selects which exposure time is read by the ChunkExposureTime feature.
ChunkExposureTime
Returns the exposure time used to capture the image.
ChunkGamma
Returns the gamma used to capture the image.
Name
Description
TestPendingAck
Tests the device's pending acknowledge feature. When this feature is written, the device
waits a time period corresponding to the value of TestPendingAck before acknowledging
the write.
TestEventGenerate
Generates a Test Event.
TriggerEventTest
This register is used to control the generation of test events.