No.17S138-00
42/58
STC-MBS881U3V / STC-MCS881U3V / STC-MBS122BU3V / STC-MCS122BU3V
Product Specifications and Use’s Guide
The gain adjusts automatically to achieve the target brightness.
When the current brightness of image was darker than target brightness, increases the gain up to “Gain Auto
Limit Max”.
When the current brightness of image was brighter than target brightness, decrease the gain down to “Gain Auto
Limit Min”.
GenICam Parameters
GainAuto
IEnumeration Type
Switch On / Off for AGC
Continuous: AGC On, Off: AGC Off.
Default: Off
GainAutoLimitMax
IFloat Type
Sets the maximum gain for AGC
Range: 0 to 240, Default: 127
This value sets as maximum gain for AGC.
GainAutoLimitMin
IFloat Type
Sets the minimum gain for AGC
Range: 0 to 240, Default: 0
This value sets as minimum gain for AGC.
The exposure time adjusts automatically to achieve the target brightness.
When the current brightness of image was darker than target brightness, extend exposure time up to “Exposure
Auto Limit Max”.
When the current brightness of image was darker than target brightness, reduce exposure time down to
“Exposure Auto Limit Min”.
GenICamParameters
ExposureAuto
IEnumeration Type
Switch On / Off for Auto Exposure
Continuous: Auto Exposure On,
Off: Auto Exposure Off.
Default: Off
ExposureAutoLimitMax
IFloat Type
Sets the maximum exposure time in μsecond unit
Range: Same as Exposure Time Range for each PixelFormat
ExposureAutoLimitMin
IFloat Type
Sets the minimum exposure time in μsecond unit
Range: Same as Exposure Time Range for each PixelFormat
Please follow setting procedure shown below.
Setting Procedure
1.
Sets “Timed” at “Exposure Mode” (When using Auto Exposure)
2.
Sets “Continuous” at “Exposure Auto” (When using Auto Exposure)
3.
Sets “Exposure Auto Limit Max” (When using Auto Exposure)
4.
Sets “Exposure Auto Limit Min” (When using Auto Exposure)
5.
Sets “Continuous” at “Gain Auto” (When using AGC)
6.
Sets “Gain Auto Limit Max” (When using AGC)
7.
Sets “Gain Auto Limit Min” (When using AGC)
