No.14S056-11
9
STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide
2.4 Power/IO connector:
HR10A-7R-6PB (Hirose) or equivalent.
This connector is for 12Vdc power input and the input and output signals.
The trigger input and sync input /output signals can be assigned through the camera setting
communication.
Pin assignment
Table 3. Pin assignment
(Note 1)
Trigger input signal can be assigned either on Camera Link connector (CC1) or on the No. 2 pin of the power/IO
connector through the camera setting communication.
As for the actual method of hardware trigger, please refer to the
Using the Trigger Signal through 6pin
LowVoltage
HighVoltage
1
GND
IN
2
SP-4
IN/OUT
IN
0 ～ +0.99V
+2.3 ～ +3.6V
OUT
0V
+3.3V
3
SP-3
IN/OUT
IN
0 ～ +0.99V
+2.3 ～ +3.6V
OUT
0V
+3.3V
4
SP-2
IN/OUT
IN
0 ～ +0.99V
+2.3 ～ +3.6V
OUT
0V
+3.3V
5
SP-1
IN/OUT
IN
0 ～ +0.99V
+2.3 ～ +3.6V
OUT
0V
+3.3V
6
+12Vdc
IN
+12Vdc
0V
Pin No
Signal Name
IN/OUT
Voltage
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.
