background image

Switch Mode Power Supply

S8VS

(15/30/60/90/120/180/240/480-W Models)

60/90/120/180/240/480-W Models

High-capacity, Natural Cooling 
(Fanless) 480-W Model Added to 
Series

• Compact size: 150 

×

 115 

×

 127.2 mm (W 

×

 H 

×

 D) 

(480-W models).

• Status displayed on 3-digit, 7-segment display.
• Safety standards: 

UL508/60950-1, 
CSA C22.2 No. 14/60950-1 (excluding 480-W mod-
els),
CSA C22.2 No. 107.1/60950-1 (480-W models), 
EN50178 (= VDE0160), 
EN60950-1 (= VDE0805 Teil 1)

15/30-W Models

Compact, Thin Power Supplies That 
Mount Just About Anywhere to 
Contribute to Control Panel 
Downsizing

• Compact, thin size: 22.5 

×

 85 

×

 96.5 mm (W 

×

 H 

×

D).

• Three mounting directions 

(standard, horizontal, facing horizontal).

• Mounting directly to the panel is possible. 

• Safety standards: 

UL508/60950-1/1604, cUL: CSA C22.2 No. 14/
60950-1/213, 
EN50178 (= VDE0160), EN60950-1 (= VDE0805 Teil 1).

Features Common to All Models

• Mount to DIN Rail.

• Complies with SEMI F47-0200 (200-VAC input). 

• RoHS-compliant.

Note:

Refer to 

Safety Precautions

 on page 26.

http://www.ia.omron.com/

1

(c)Copyright OMRON Corporation 2007   All Rights Reserved. 

Summary of Contents for S8VS Series






























Reviews: