background image

New S82K

New S82K

11

Operation

 Undervoltage Alarm Indicator and Output Function 

(All Models Except for S82K-24024/P24024)

If the output voltage at the output terminal drops to 75% to 90% of the rated voltage, the red indicator of the S82K (DC LOW indicator) will be lit. In
the case of the S82K-10024/24024T, a voltage drop alarm will be output via the relay available in the models (DC LOW output).

Note:

This function detects the voltage at the output terminal of the Power Supply. To check the precise output voltage, measure the voltage
at the terminal of the load.

Indicator

Voltage

Operation of 10024/ 24024T’s

output (DC LOW output)

 (see note 2)

Green:

DC ON

Red:

DC LOW

If the voltage at the output terminal is more than 90%
of the rated voltage, the green indicator will be lit.

Green:

DC ON

Red:

DC LOW

(see note 1)

If the voltage at the output terminal is 75% to 90%,
the red indicator will be lit.

Green:

DC ON

Red:

DC LOW

If the voltage at the output terminal is 0 V, both the
green and red indicators will not be lit.

Note:

1. The more the voltage at the output terminal drops, the darker both the green and red indicators will be.

2. The relay contacts have a capacity of 0.1 A at 24 VDC.

 Block Diagrams

S82K-003

jj

 (3 W)

S82K-007

jj

 (7.5 W, Single Output)

Fuse (1 A)

Noise filter

Inrush current
protection circuit

Rectifier

Drive control
circuit

Photocoupler

AC (L)

AC (N)

Rectifier

– V

+ V

Undervoltage
alarm
indicator

Overload
alarm
 circuit

Detector

S82K-007

jj

 (7.5 W, Dual Outputs)

Fuse (1 A)

Noise filter

Inrush current
protection circuit

Rectifier

Drive control
circuit

Photocoupler

AC (L)

AC (N)

Rectifier

– V

+ V

Rectifier

Undervoltage
alarm
indicator

3-terminal
REG

Overload
alarm 
circuit

Detector

Summary of Contents for S82K-00305


















Reviews: