AETOS POWER SUPPLY
INSTRUCTION MANUAL
The Walrus Audio Aetos is an 8-output, isolated
power supply, utilizing an internal custom wound
toroidal transformer to provide the highest noise
filtering and cleanest power, giving artists the
purest sound in their signal chain. The Aetos is
housed in a solid die cast enclosure and is 4.7”long
x 3.7” wide x 1.2” height and has 8 total 9VDC
outputs, 6 are 100mA and 2 outputs are high
current outputs (300mA) for higher current drawing
pedals like Line 6 DL series modelers, the Boss
Twin Series Pedals, Strymon, and many digital
modulation pedals on the market. It comes with a
detachable 230V AC Power cord. This unit comes
with 8 – 2.1mm barrel black power cables and 2
black-to-red (line 6) power cables.
OPERATING INSTRUCTIONS
Plug in the 230VAC power cord to the 230VAC
input. Plug the Male end of the power cord into a
230VAC power source 230VAC only – this
product is not rated for any other voltages). Once
plugged in, the blue LED will light up indicating
that the power supply is on.
Warning!
Before connecting your effects pedal to
the Aetos, you must first verify the power
requirements for your pedal.
VOLTAGE RATING
The voltage rating for your pedal must be 9VDC
(direct current), do not use the Aetos for AC
(alternating current) pedals. Most effects pedals
are designed for 9VDC power, however, you
should always check first or you could risk
destroying your pedal. For other voltages, like
12VDC, 18VDC or 24VDC, which are common,
you will need to use a custom power supply that
the manufacturer provides or recommends.
9VDC 300mA
9VDC 100mA
AETOS
clean power supply
9VDC 300mA
9VDC 100mA
230V
AC In
230VAC In
(x8)
2.1mm – Standard for
Most Effects Pedals
(x2) Red-to-Black
2.1mm – Reverse Polarity
for Line 6 Effects Pedals
230VAC UK power cord
No user serviceable parts inside.
Do not remove cover, risk of electrical shock.
Warranty is voided if backplate is removed.
CAUTION
AETOS | UK
