37
6. Maintenance and inspection
2. Procedures for the replacement of the BU200XR2 battery and add-on
battery units: MB100XR2/MB200XR2.
2-1
Unscrew 4 screws that hold both sides of the front panels to the battery unit.
2-2
Hold the handgrip of the left front panel and slide the left panel to the left
q
, and pull it toward you
w
and remove. In the same way, hold the handgrip of the right front panel and slide the right panel to the
right
e
, and pull it toward you
r
. While holding snap-on cable connector attached to the panel, pull
out the cable connector from the right front panel.
2-3
Unscrew the screw counterclockwise at the right upper side of the battery pack
q
. Hold the white
pullout label at the bottom of the battery pack and pull as far as you see a yellow tape stuck on the top
of the battery pack
w
. Unhook the battery connecting cable while holding the battery pack.
q
w
e
q
w
e
r
