manualshive.com logo in svg

Omron NY532-1*00-111*13**0, User Manual, Page: 44 / 214

Share
Download
Omron NY532-1*00-111*13**0 User Manual Download Page 44

1-1

Intended Use

The IPC Machine Controller is an industrial-grade PC intended for use within factory automation envi-
ronments. This Panel PC simultaneously uses the standard Windows operating system and programs
alongside OMRON's Sysmac Machine Controller Software to serve as a powerful PC based machine
control platform.
The Panel PC can be easily integrated in manufacturing innovations like big data, NUI and IIoT with-
out compromising on the proven reliability and robustness of a PLC.
The IPC Machine Controller has a compact design that offers flexibility, expandability and easy main-
tenance for applications in factory automation environments.
A user can access the Industrial Panel PC for control, configuration and supervisory operations using
the integrated touchscreen display.

1 Introduction to the Industrial Panel PC

1 - 2

NY-series Industrial Panel PC Hardware User's Manual (W557)

Summary of Contents for NY532-1*00-111*13**0























































































































































































































Reviews:

No comments