Omron NY532-1*00-111*13**0, User Manual, Page: 102 / 214

EtherNet/IP Connector Specifications
The EtherNet/IP connector is assigned to the Machine Controller Software.
This port can be used for communication between the IPC Machine Controller and Ethernet/IP units.
Item Specifications
Ethernet connector number 2
Physical layer 10BASE-T, 100BASE-TX or 1000BASE-
T
Frame length 1,514 bytes max.
Media access method CSMA/CD
Modulation Baseband
Topology Star
Baud rate 1 Gbps (1000BASE-T)
Transmission media STP (shielded, twisted pair) cable of
Ethernet category 5,5e or higher
Maximum transmission distance between Ethernet switch and node 100m
Maximum number of cascade connections There are no restrictions if an Ethernet
switch is used.
CIP Serv-
ice: Tag da-
ta links (cy-
clic commu-
nications) Maximum number of connections 128
Packet interval 1 to 10,000 ms in 1.0-ms increments
Can be set for each connection.
Permissible communications band 20,000 pps (including heartbeat)
Maximum number of tag sets 128
Tag types Network variables
Number of tags per connections (i.e., per tag set) 8 (7 tags if Controller status is included
in the tag set)
Maximum number of tags 256
Maximum link data size per node (total size for all
tags) 184,832 bytes
Maximum data size per connection 1,444 bytes
Maximum number of registrable tag sets 128 (1 connection = 1 tag set)
Maximum tag set size 1,444 bytes (Two bytes are used if Con-
troller status is included in the tag set)
Multi-cast packet filter Supported
CIP mes-
sage serv-
ice: Explicit
messages Class 3 (number of connections 64 total (clients plus server)
UCMM (non-connection
type) Maximum number of cli-
ents that can communi-
cate at one time 32
Maximum number of serv-
ers that can communicate
at one time 32
Number of TCP sockets 30
4 Specifications
4 - 16
NY-series Industrial Panel PC Hardware User's Manual (W557)