![background image](http://html.mh-extra.com/html/omron/nt21/nt21_setup-manual_744541179.webp)
6-12
Section
Programming Console Function
168
*2: The CPM2C-CN111 Connecting Cable splits the PC’s Communication Port into a
RS-232C port and a peripheral port.
*3: An RS-232C cable cannot be directly connected to the peripheral port. An
RS-232C adapter (CPM1-CIF01) is required.
*4: The RS-232C cable cannot be directly connected to the peripheral port. An
RS-232C Adapter (CS1W-CN118) is required.
Reference: Note that the Programming Console function cannot be used with CPM1, CQM1,
and C200HX/HG/HE PCs of the following lot numbers.
CPM1:
jjj
5,
jj
*6
where * is a number in the range 1 to 9 or the letter X or Y.
CQM1:
jjj
3,
jjj
4,
jjj
5,
jj
*6
where * is a number in the range 1 to 9 or the letter X or Y.
C200HX/HG/HE:
jjj
5
jj
*6
where * is a number in the range 1 to 9 or the letter X or Y.
6-12-2 Connection Method
The connection method is exactly the same as for the 1:1 NT Link. Refer to Sec-
tion 4 Connecting to the Host from the RS-232C Port or Section 5 Connecting to
the Host from the RS-422A/485 Port for details on connecting to the PC.
* When using the Programming Console function with a CQM1H, turn ON pin 7 of
the DIP switch on the front of the CQM1H’s CPU Unit.
The connection method is the same as for the 1:1 NT Link. With a CPM1, con-
nect the RS-232C cable to the peripheral port via a CPM1-CIF01 RS-232C
Adapter or CPM1-CIF11 RS-422A Adapter.
Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
Connecting to the Host from the RS-422A/485 Port for details on connecting to
the PC.
The connection method is the same as for the 1:1 NT Link. Connect to the PC’s
communications connector with a CPM2C-CN111, CS1W-CN114/118 Connect-
ing Cable, a CPM1-CIF01 RS-232C Adapter, or a CPM1-CIF11 RS-422A Adapt-
er.
Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
Connecting to the Host from the RS-422A/485 Port for details on connecting to
the PC.
* When using the Programming Console function with a CPM2C, turn ON pin 2 of
the DIP switch on the front of the CPM2C’s CPU Unit.
The connection method is exactly the same as for the 1:N NT Link (standard or
high-speed). Refer to Section 4 Connecting to the Host from the RS-232C Port
or Section 5 Connecting to the Host from the RS-422A/485 Port for details on
connecting to the PC. The standard or high-speed 1:N NT Link can be used.
The Programming Console function can be used only when the PT’s unit num-
ber is set to 0. Only one Unit using the Programming Console function can be
connected to each of the PC’s ports (built-in RS-232C port and peripheral port).
With the CS1G/CS1H, CS1G-H/CS1H-H, and CJ1G PCs, the Programming
Console function can be used simultaneously at both the built-in RS-232C port
and peripheral port. Furthermore, the Programming Console function can be
started at the RS-232C port while a Programming Console is connected to the
peripheral port.
CQM1, CQM1H,
C200HX/HG/HE(-ZE), or
SRM1
CPM1 or CPM2A
CPM2C
CS1G/CS1H,
CS1G-H/CS1H-H, or
CJ1G