![background image](http://html.mh-extra.com/html/omron/nt21/nt21_setup-manual_744541128.webp)
6-4
Section
Memory Initialization
117
After initialization, the memory switch statuses are as follows.
Memory Switch
Status
Start-up Wait Time
00
Key Press Sound
ON
Buzzer Sound
OFF
Battery Check
OFF
Screen Saver Movement
Display erased
Screen Saver Start up Time
010
Hist. Disp. Method
From New Data
Resume Function
OFF
Comm. Auto-return
OFF
Time-out Interval
01
Retry Counts
005
Comm. A Method
Host Link (baud rate = 9,600 bps)
*
Comm. B Method
None
* The communication conditions for a bar code reader are initialized as follows:
Data bits: 7 bits; stop bits: 1 bit; parity: none; flow control: RS/CS.
6-4-6 Initializing the Recipe Tables
You can initialize the recipe tables (i.e., all the recipe data) edited in the NT21.
Here, “initializing” the recipe tables means to restore the battery backup memory
(“recipe data memory”) to the values in flash memory at that time. If, after down-
loading from the NT Support Tool, you do not upload the data even once, initial-
ization will restore the initial values set using the NT Support Tool. The values will
not be cleared.
Reference: If the optional battery is not installed, the recipe data will be initialized when the
PT’s power is turned OFF.