6-7
Section
Setting Conditions for Communications with Host by Using Memory Switches
127
6-7-2 Setting the Host Link Method
Set the communication conditions for the host link method at serial port A or seri-
al port B by following the menu operations from the Maintenance Mode Menu as
shown below.
Select Memory Switch.
Display the fourth memory switch screen by
pressing the [
↓
] (next screen) or [
↑
] (pre-
vious screen) touch switch.
Press the touch switch corresponding to the
port at which the host link method is to be set
(Comm. A Method or Comm. B Method) to
display the setting option Host Link.
The communications method setting on the
right will change each time that the touch
switch is pressed.