![background image](http://html.mh-extra.com/html/omron/ns-host/ns-host_connection-manual_744515027.webp)
15
Selectable Smart Active Parts are shown in the preview box on the right. Title of the selected
Smart Active Parts are shown in the bottom center dialogue box.
Select appropriate Smart Active Parts and click
Use
.
By doing so, the selected Smart Active Parts is pasted onto the screen that is being edited.
The Smart Active Parts part is pasted onto the upper left corner of the screen. Move to the
desired location.
Or, click the Smart Active Parts part and set communications parameters.
SerialA
:when connected to serial port A
port to which command
is
sent
SerialB
:when connected to serial port B
0 to
31
:Communications unit No. of the
temperature
controller you want to operate.
Destination Unit No.
With broadcast to all parts, this parameter
is not used. Keep default value 0.