7
2-3-4 CJ1W-CIF11 setting
Dip switch setting
Pin No.
Function
setting
ON
Terminating resistance (on both
ends of the communications
path)
1
Terminal resistance
select ON/OFF
OFF
No terminating resistance (other
than both ends of the
communications path)
2
Switch between 2/4 line
system
ON
3
Switch between 2/4 line
system
ON
2 line system
4 Not
used
-
5
RD control by RS
select ON/OFF
OFF
6
SD control by RS
Select ON/OFF
ON
RS control function ON
2-3-5 NS setting
Before you can connect temperature controllers, you need to store the required project in the
NS. For project setting, refer to ‘2-4 project setting’.
With communications settings under system menu, you can set the speed of
communications.
Baud rate
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /115200
bps
Of these values, 57600 / 115200 are for future use.
Present temperature controllers cannot operate at these rates.
Set PT unit and temperature controller baud rate values to match each other.
