4
．
Overview
5
4. Overview
This document describes the procedures for connecting Displacement Sensor (hereinafter
referred to as Sensor Controller) to NJ Series Machine Automation Controller (hereinafter
referred to as Controller) via EtherNet/IP, both produced by OMRON Corporation (hereinafter
referred to as OMRON), and for checking their connections.
Refer to
Section 6. EtherNet/IP Settings
and
Section 7. EtherNet/IP Connection Procedure
to
understand setting methods and key points to operate EtherNet/IP tag data links.
Additional Information
Settings described in
7.3. Controller Setup
are made in advance in the Sysmac Studio project
file (hereinafter referred to as project file) listed below. Refer to
Section 9. Appendix:
Procedure Using the Project File
for information on how to use the project file.
Obtain the project file with a latest version from OMRON Corporation.
Name
File name
Version
Sysmac Studio project file
(extension: csm2)
P653_NJ_EIP_OMRON_ZW-70
00_EV100.csm2
Ver.1.00
Summary of Contents for NJ501-1500
Page 56: ...2016 0616 P653 E1 01...
