9
．
Appendix: Procedure Using the Project File
49
9. Appendix: Procedure Using the Project File
This section describes the procedure in which you use the following project file.
The project file includes the setting contents described in
7.3. Controller Setup
.
Obtain the project file with a latest version from OMRON Corporation.
Name
File name
Version
Sysmac Studio project file
(extension: csm2)
P653_NJ_EIP_OMRON_ZW-7000_EV
100.csm2
Ver.1.00
9.1. Work Flow
Take the following steps to make the EtherNet/IP tag data link settings using the project file.
Refer back to each of the following procedures for details except for
9.2.1. Importing the
Project File
marked with a red square.
7.2. Sensor Controller Setup
Set up Sensor Controller.
↓
9.2. Controller Setup
Set up Controller using the project file.
↓
7.3.1. IP Address Settings
Set the IP address of Controller.
↓
9.2.1. Importing the Project File
Import the project file to Sysmac Studio.
↓
7.3.6. Transferring the Project Data
Connect online and transfer the connection
settings and the project data to Controller.
↓
7.4. EtherNet/IP Communication Status
Check
Confirm that the EtherNet/IP tag data links operate
normally.
Summary of Contents for NJ501-1500
Page 56: ...2016 0616 P653 E1 01...
