Omron MS4800E, Operation Manual

Page: 39 / 98

21
Selecting Scan Codes
Section 7-7
7-7 Selecting Scan Codes
The MS4800 receiver and transmitter offer scan code selection to minimize
cross talk. On the transmitter this is activated by setting position 1. On the
receiver this is activated by setting position 3 of switch A and switch B.
Note Both receiver and transmitter must be set to the same code.
Example:
To mitigate interference from other light curtains, the MS4800 system has two
possible scan codes, A and B. The transmitter and receiver units must be set
to the same scan code for the receiver to enter the MACHINE RUN state.
Scan Code A
Scan Code B