manualshive.com logo in svg

Omron In-Panel NEO Series, Connection Manual, Page: 21 / 48

Share
Download
Omron In-Panel NEO Series Connection Manual Download Page 21

Temperature Controller CompoWay/F Driver   

GP-Pro EX Device/PLC Connection Manual

21

„

Device Setting

To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the 

External Device you want to set from the displayed list, and touch [Device Settings].

Timeout

Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the 
response from the External Device.

Retry

In case of no response from the External Device, use an integer from 0 to 255 to enter how 
many times the Display retransmits the command.

Wait To Send

Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving 
packets to transmitting next commands.

Setup Items

Setup Description

Device/PLC name

Select the External Device to set. Device name is a title of the External Device set with GP-
Pro EX. (Default value [PLC1])

Series

Displays a model of the External Device.

Unit No.

Enter the unit No. for HOST link.

Setup Items

Setup Description

Summary of Contents for In-Panel NEO Series

















































Reviews:

No comments