Omron In-Panel NEO Series, Connection Manual, Page: 20 / 48

Temperature Controller CompoWay/F Driver
GP-Pro EX Device/PLC Connection Manual
20
4.2 Settings in Offline Mode
„ Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [System setting window] in workspace. Touch
the External Device you want to set from the displayed list.
• Refer to the Maintenance/Troubleshooting guide for information on how to enter offline mode or
about the operation.
Cf. Maintenance/Troubleshooting Guide "Offline Mode"
• The number of the setup items to be displayed for 1 page in the offline mode depends on the
Display in use. Please refer to the Reference manual for details.
Setup Items Setup Description
SIO Type
Select a SIO type for communicating with an external device from "RS232C", "RS422/485
(2-wire)", and "RS422/485 (4-wire)".
To make the communication settings correctly, confirm the serial interface specifications
of Display unit for [SIO Type].
We cannot guarantee the operation if a communication type that the serial interface does
not support is specified.
For details concerning the serial interface specifications, refer to the manual for Display
unit.
Speed Select speed (bps) between the External Device and the Display.
Data Length Select the data length (bit) for communication. Select either "7" or "8".
Parity Select how to check parity. Select any of "None", "Even" and "Odd".
Stop Bit Select stop bit length. Select either "1" or "2".
Flow Control
The communication control method to prevent overflow of transmission and reception data
is displayed.