- 49 -
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
The functions of external input can be selected between input for
setting manual operation after power failure recovery, totalizing
input, time adjustment input, and bank switch input.
Setting
The setting is made in F2 (input selection) of initial setting mode.
Press for 3 s or more in program
setting mode to enter initial setting mode.
Give a short press on and
move to the F2 display.
Select one of the inputs using or .
(The symbol on the sub-display will flash.)
Press to confirm the setting.
(The symbol on the sub-display will change from flashing to lighting.)
Note
• To leave initial setting mode, press for 3 s or more.
• If is pressed again before confirming the setting, the setting is
cancelled.
• If the input setting is changed from or to bank switch input, all the set programs
will be cleared when is pressed.
6-6-2. F2 Input Selection
Parameters
----
··· Input disabled
boot
···
Input for setting manual operation after power failure recovery (
6-3)
totl
··· Totalizing input (
6-1)
sync
··· Time adjustment input (
6-2)
bank
··· Bank switch input (
6-4)
Bank switch input is available for the weekly 2 channel type only.
The inverted character
indicates the default.
WRITE
WRITE
TIME ADJ
TIME ADJ
TIME ADJ
TIME ADJ
h
m
The color indicates flashing.
Set the Mode Switch to RUN.