- 25 -
Press .
Set the ON time with and . 2
Press to confirm the settings.
Press .
Specify the end date using ,
and . 2
If the starting year has been set to "
--
",
the ending year cannot be set.
Number of
remaining steps
Note
• If multiple settings are required, repeat the steps
through .
•
•
• It is possible to set the Time Switch to operate for only one day (i.e., the start
date is the same date as the end date).
• If one or more yearly programs have been set, the " " indicator light will
turn on in run mode whether the yearly program is performed or not.
•
• The set data will be cleared if the OUTPUT setting switch is moved between the
TIMER and PULSE positions after the data has been set.
Y
M
h
m
D
WRITE
WRITE
Press .
Set the OFF time with and . 2
h
m
WRITE
WRITE
1
If one or more programs have already been set, the display starts showing the set programs.
To add another program, press repeatedly until "
--.--
" is displayed.
2
Holding down these Keys rapidly advances the value.
WRITE
Set the Mode Switch to RUN.
⑧
• It is disable to specify February 29th of the leap-year when the year is not
specified. If you would like to set the operation by the last day of February
(February 28th or February 29th),please use the Season Switching(P.46).
the Key that was last pressed.
decrements the value of
Pressing
HOLIDAY/
SELECT PRGM/
or
