Omron H5S - Instruction Manual Download Page 54

Page: 54 / 72

- 53 -

Weekly

2 chnls

Yearly

2 chnls

Yearly

4 chnls

Manual and automatic summer time adjustment is selectable.

Setting

The setting is made in F6 (summer time adjustment) of initial setting mode.

Press for 3 s or more in program
setting mode to enter initial setting mode.
Give short presses on and
move to the F6 display.

Change the setting using or .
The symbol on the sub-display will flash.

Press to confirm the setting.
(The symbol on the sub-display will change from flashing to lighting.)

Note

• If summer time adjustment is set to “

auto

” (automatic adjustment), will

be ignored.

• To leave initial setting mode, press for 3 s or more to leave the

initial setting mode.

• If is pressed again before confirming the setting, the setting is

cancelled.

6-6-6. F6: Summer Time (DST) Adjustment

Parameters

off

Manual adjustment

auto

Automatic adjustment (Select summer time schedule in F7.)

The inverted character

indicates the default.

The color indicates flashing.

TIME AD

IME

TIME AD

WRITE

Set the Mode Switch to RUN.

Summary of Contents for H5S -









































































Search results

Summary of Contents for H5S -

Reviews:

Related manuals for H5S -

Brands by name

Popular brands

Omron H5S -, Instruction Manual

Search results

Summary of Contents for H5S -

Reviews:

Related manuals for H5S -

Brands by name

Popular brands