- 42 -
Example The Time Switch executes an override and automatic
return operation when output is OFF.
Override and automatic return operation for pulse-output operation is as shown below.
The operation procedure is the same as for timer operation.
Using override and automatic return operation for
pulse-output operation
Setting
The time at which the OUT switch is turned ON.
The time at which the OUT switch is turned to AUTO with pressed.
Actual output
performance
The next ON/OFF operation
is automatically executed
according to the previous
settings.
Ta
Tb
Tb
Example The Time Switch executes an override and automatic
return operation when output is ON.
Setting
The time at which the OUT switch is turned OFF.
Actual output
performance
The next ON/OFF
operation is
automatically
executed according to
the previous settings.
Note
• Override and automatic return operation is possible in run mode only (while the
power is being supplied).
• To manually cancel the setting of override and automatic return operation, turn
the OUT ON/OFF switch to the opposite position to the present output state.
<Example> Turning the OUT switch OFF when output is ON.
• If the power supply is turned OFF, the override and automatic return operation is cancelled.
• If the current time or the set programs are changed, the override and automatic
return operation is cancelled.
• Do not execute override and automatic operation while cyclic operation is
performed.
WRITE
The time at which the OUT switch is turned to AUTO with pressed.
WRITE
Pulse width set for the next
pulse-output operation