F3SG-RA
4
Sensor Mounting Brackets
*1 Two brackets per set
[for F3SG-
@
RA
@@@@
-14]
- Protective height of 0160 to 1200: 2 sets, Protective height of 1280 to 2080: 3 sets
[for F3SG-
@
RA
@@@@
-30]
- Protective height of 0190 to 1230: 2 sets, Protective height of 1310 to 2270: 3 sets, Protective height of 2350 to 2510: 4 sets
*2 Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable Bracket.
(See *1 for the number of required brackets.)
Interface units and configuration tool SD Manager 2
Lamp
End Cap
Appearance
Specification
Application
Model
Standard Fixed
Bracket
Bracket to mount the F3SG-R.
Side mounting and backside mounting possible.
(Included in the F3SG-R product package. See *1 below
for the number of included brackets.)
F39-LGF
Standard
Adjustable
Bracket
Bracket to mount the F3SG-R.
Beam alignment after mounting
possible.The angle adjustment range is
±
15
°
.
Side mounting and backside mounting possible.
(Sold separately. See *1 below for the number of required brackets.)
F39-LGA
Top/Bottom
Adjustable Bracket *2
Bracket to mount the F3SG-R. Use this bracket at the
top and bottom positions of the F3SG-R.
Beam alignment after mounting possible.
The angle adjustment range is
±
22.5
°
.
Side mounting and backside mounting possible.
(Sold separately. 4 brackets per set.)
F39-LGTB
Top/Bottom
Adjustable Bracket *2
(For user-made
mounting part)
Top/Bottom Adjustable Bracket without a bracket to
mount to the wall. Use the user's own wall mounting part
to suit the machine.
(Sold separately. 4 brackets per set.)
F39-LGTB-1
Appearance
Type
Specifications
Model
SD Manager2
The Configuration Tool SD Manager 2 is available to
download from our website at
http://www.omron
247
.com/
safety_light_curtain/
f3sg_ra/Software tools/SD Manager 2 Configurator
.
To change the settings of the F3SG-RA using SD
Manager 2, it is necessary to set the receiver's two
DIP switches No. 8 to ON.
−
Interface Unit
F39-GIF interface unit to connect the F3SG-RA
receiver to a USB port of the PC
F39-GIF
Bluetooth unit
F39-BT bluetooth unit to enable bluetooth on the
F3SG-RA
F39-BT
Appearance
Type
Specifications
Model
Lamp unit
The lamp unit can be connected to a receiver and
turned ON based on the operation of F3SG-RA.
The lamp can indicate red, orange, and green colors,
to which three different states can be assigned.
F39-LP
Blu Lamp unit
F39-BTLP
Appearance
Specifications
Model
Housing color: Black
For both emitter and receiver
(Attached to the F3SG-R. The End Cap can be purchased if lost.)
F39-CNM
