![background image](http://html1.mh-extra.com/html/omron/e39-p31/e39-p31_datasheet_740995010.webp)
A-464
Advanced Photoelectric Sensors
Light level
Threshold
The incident light level
and threshold value
The information displayed in RUN mode can be selected.
When going to SET mode, this setting will be ignored and
the incident light level and threshold value will be displayed.
3. Display Switch
% light level Threshold
L-PE
D-BT
Alternates at
a fixed interval
L-BT
D-PE
Detection status
Light level
PEAK
Light level
Peak level
The current incident
light level and the peak
incident light level.
Light level
Channel
The incident light level
and the channel.
Count
(External-input Models
Only) The counter value.
The incident light level
as a percentage of the
threshold value and the
threshold value.
The incidient light peak
level and no incident
light bottom level.
The min. incidient light
peak level and max. no
incident light bottom level.
The display is updated for
every 10 ON/OFF operati-
ons.
Analog bar display. The
current detection status
is displayed as an ana-
log bar. The bar will
lengthen from the right
A
B
Tunes the power.
PTUN
0RST
Executes a zero reset.
CRST
(External-input Models Only)
Resets the counter.
The function of the MODE key in RUN mode can be
selected.
4. MODE Key
Setting
A
B
1-ms increments
1 to 20 ms
5-ms increments
20 to 200 ms
100-ms increments
200 ms to 1 s
1-s increments
1 to 5 s
Timer disabled.
----
OFF D
OFF-delay timer
ON-D
ON-delay timer
1SHT
One-shot timer
Setting range: 1 to 5,000
Not
Set separately for each channel for Twin-output Models.
2. Timer
Timer Time