Omron CX-Programmer, Introduction Manual

Page: 8 / 60

Before installation of CX-Programmer, you must:
•
terminate all Windows programs, and
• uninstall older version of CX-Programmer and peripheral tools (such as CX-Protocol) if
they are already installed.
• Installation takes about 5 to 20 minutes depending on your PC. (5 minutes for a PC with
CPU: Celeron2.2GHz, main memory: 512MB, and CD-ROM drive: 48x)
• To change/modify/delete CX-Programmer after installation, refer to the PDF manual “CX-
Programmer Operation Manual” , Chapter 2 ”Installation and Uninstallation”.
Before installation of CX-Programmer, you must:
•
terminate all Windows programs, and
• uninstall older version of CX-Programmer and peripheral tools (such as CX-Protocol) if
they are already installed.
• Installation takes about 5 to 20 minutes depending on your PC. (5 minutes for a PC with
CPU: Celeron2.2GHz, main memory: 512MB, and CD-ROM drive: 48x)
• To change/modify/delete CX-Programmer after installation, refer to the PDF manual “CX-
Programmer Operation Manual” , Chapter 2 ”Installation and Uninstallation”.
Insert the CX-Programmer installation disk (CD-ROM) to your PC’s CD-ROM drive.
[Choose Setup Language] dialog box is displayed. Default language of the OS on your PC is
automatically selected.
Check if the language is appropriate, then click [OK].
Click [OK].
CX-Programmer splash screen is displayed, then CX-Programmer installation is started.
1. Installation procedure of CX-Programmer
1-1. Installing CX-Programmer
Installation
to Startup
Installation
to Startup
Opening a
new project
Opening a
new project
Device type
settings
Device type
settings
Creating a
program
Creating a
program