Omron CK3E Series, Hardware User Manual, Page: 86 / 114


NoClocks
Register name Sys.NoClocks
Description Cannot detect a phase clock or a servo clock.
Range 0 to 1
Details 0: No error
1: Cannot detect a phase clock or a servo clock.
Detection timing When power is turned ON or the Controller is reset.
Recovery Cycle the power supply, or issue reset command ($$$)
Effects Cannot enable the motor.
Cause and cor-
rection Cause (Assumed cause) Correction Prevention
The clock-related register is
overwritten by the user pro-
gram. If the error no longer occurs
after the re-initialization
command ($$$***) is exe-
cuted, review the user pro-
gram. None
The Motion Controller
failed. If the error still persists
even after the above cor-
rective actions have been
taken, replace the Motion
Controller. None
Precautions/
Remarks None

Default
Register name Sys.Default
Description Initialized to the factory default setting.
Range 0 to 1
Details 0: No error
1: Cases below
•
In the factory default state, or initialized to the factory default state by a re-initializa-
tion command ($$$***).
•
Configuration changed after save command was issued.
Detection timing When power is turned ON or the Controller is reset.
Recovery Cycle the power supply, or issue reset command ($$$)
Effects Operation continues
Cause and cor-
rection Cause (Assumed cause) Correction Prevention
Re-initialization command
($$$***) was issued. None None
ConfigLoadErr occurred. Check the corrective action
for each error. None
Precautions/
Remarks None
5 Error Processing
5-10
CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)