manualshive.com logo in svg

Omron CK3E Series, Hardware User Manual, Page: 43 / 114

Share
Download
Omron CK3E Series Hardware User Manual Download Page 43

2-2

Specifications of Peripherals

2-2-1

USB Memory Device

You can use a USB memory device for the following applications.
• Uploading data
• Downloading data
• Saving relevant data
• Initializing Motion Controller

The following shows details of the recommended USB memory devices.
OMRON is not responsible for the operation of any other USB memory devices.

Recommended USB memories

Description

FZ-MEM2G

OMRON USB memory device (2 GB)

FZ-MEM8G

OMRON USB memory device (8 GB)

2-2-2

Power Supply

The following shows details of the recommended power supply.

Recommended power supply: Model S8JX series (OMRON)

For specifications and manuals of Model S8JX, visit the OMRON website (http://www.fa.omron.co.jp/
products/family/1989/lineup.html).

2 Specifications

2-5

CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)

2-2 Specifications of Peripherals

2

2-2-1

 USB Memory Device

Summary of Contents for CK3E Series



















































































































Reviews:

No comments