manualshive.com logo in svg

Omron CK3E Series, Hardware User Manual, Page: 46 / 114

Share
Download
Omron CK3E Series Hardware User Manual Download Page 46

3-1

Part Names and Functions

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(J)

(I)

Letter

Name

Function

(A)

USB 3.0 connector

The connector of USB 3.0 interface.
Used to connect a USB memory device.

(B)

Maintenance mode LED

Not used.
Used for maintenance.

(C)

Maintenance mode enter button

Not used.
Used to enter Maintenance mode. The user does not use it.

(D)

USB 2.0 connector

Not used.
Used for maintenance. The user does not use it.

(E)

Power supply connector

Connects to the Unit power supply.

(F)

EtherCAT communications port opera-
tion indicators

Shows the operation status of EtherCAT.

(G)

Ethernet communications port operation
indicators

Shows the operation status of Ethernet.

(H)

Unit operation indicators.

Shows the operation status of the Unit using multiple indica-
tors.

(I)

Ethernet communications connector

Connects to an Ethernet network communications cable.

(J)

EtherCAT communications connector

Connects to an EtherCAT network communications cable.

3 Part Names and Functions

3-2

CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)

Summary of Contents for CK3E Series



















































































































Reviews:

No comments