manualshive.com logo in svg

Omron CK3E Series, Hardware User Manual, Page: 35 / 114

Share
Download
Omron CK3E Series Hardware User Manual Download Page 35

1-3

Support Software

The following table shows the Support Software used to configure, monitor, program, and debug the
Motion Controller.

Configuration software

Application

How to Procure

Power PMAC IDE

*1

This computer software is used to configure
the Motion Controller, create user programs,
and debug the programs.

This is free software. 

*2

Power
PMAC-NC16

Power
PMAC-NC16
SDK

This computer software is used to control ma-
chine tools and CNC machines with the Mo-
tion Controller. Use this software to customize
HMI screens. The product contains extension
source codes for customization.

This is non-free software. 

*2

Power
PMAC-NC16
Runtime

This computer software is used to control ma-
chine tools and CNC machines with the Mo-
tion Controller. Use this software when you do
not customize HMI screens.

This is non-free software. 

*2

*1.

Use Power PMAC IDE Ver.2.2 or a higher version.

*2.

Contact your OMRON representative for information on how to procure.

1 Features and System Configuration

1-5

CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)

1-3 Support Software

1

 

Summary of Contents for CK3E Series



















































































































Reviews:

No comments