Omron CJ1W-CRM21, Operation Manual

Page: 63 / 172

CJ1W-PNT21 PROFINET IO Controller DTM Section 4-3
47
clicking the Read button will read the current PLC mode. Selecting the
required PLC mode and pressing the Set button will set the PLC to the
required mode.
4-3-3-2 IO Controller Setup
The IO Controller Setup item contains settings regarding the behaviour of the
PROFINET IO Controller Unit. The IO Controller Setup item is shown below.
Figure 4.9: IO Controller setup
Network Settings Box The Network Settings Box contains the fields to enter the PROFINET IO-
Controller’s Name, IP Address and Subnet Mask. This information is required
to let the PROFINET IO Controller connect to the PROFINET IO network.
/i
Auto-Addressing Box The Auto-Addressing function influences the I/O Mapping process when
adding and removing I/O modules or when editing an existing I/O Mapping.
Item Description
Name This string is the PROFINET IO name of the Unit.
IP Address This is the IP Address the PROFINET IO Controller Unit will
use to setup communication to PROFINET IO Devices and
on which the PROFINET IO Controller will be accessible from
the Ethernet network. The last number of the IP Address for
the PROFINET IO Controller Unit can not be higher that 126.
Subnet Mask This is the Subnet Mask that will be used with the above IP-
Address.
Use Gateway This is currently not supported.