30
The 3G3XV has various functions for optimum operation. Use it
with the set values according to the load conditions or operation
conditions of the matching machine. Set values are read or set by
the Digital Operator. The value of constant No. 00 determines the
groups of functions that can be accessed.
1
st
Function Group:
Set No. 00 = 1 (factory setting) to read/write basic functions
used often for operation.
2
nd
and 3
rd
Function Groups:
Set No. 00 = 2 or 3 to read/write constants which must be set in
accordance with particular load conditions.
Refer to
2-8 Description of Functions and Constants for details on
the constants and their functions.
Typical Setting
The following shows an example where acceleration time (No. 9) is
changed from 10 s to 5 s.
Other constants can be changed in the same operation.
NO
DSPL
DATA
ENTER
RESET
END
DATA
ENTER
END
Select constant No. to be
set or changed.
Constant set value is
displayed.
Constant is set or changed.
Set value is written in.
Constant No. is displayed.
Change the value with
Change the value with
(End is displayed for 1 s.)
to display constant NO.
Note:
Check that is displayed for each constant setting.
Constants cannot be changed simultaneously.
Key.
Depress
Key.
or
Key and
Depress
is displayed.
check that
Key.
Depress
Key.
or
,
PRGM
DRIVE
Enter Program Mode.
Key
Depress
Reading and Setting
Constants
Function/Constant Setting
Section 2-2
