Omron 3G3MX-A2001, Migration Giude

Page: 16 / 21

15
MV MX
Model
Function
No.
Set
value
No.
Set
value
Remarks
Acc/deceleration time select
at stall protection on
operation
n116 0 ――― ―――
Under torque detection
function select
n117 0 ――― ―――
Under torque detection level n118 10 ――― ―――
Under torque detection time n119 0.1 ――― ―――
Frequency reference 9 n120 0.00 A028 0.0
Frequency reference 10 n121 0.00 A029 0.0
Frequency reference 11 n122 0.00 A030 0.0
Frequency reference 12 n123 0.00 A031 0.0
Frequency reference 13 n124 0.00 A032 0.0
Frequency reference 14 n125 0.00 A033 0.0
Frequency reference 15 n126 0.00 A034 0.0
Frequency reference 16 n127 0.00 A035 0.0
PID control select n128 0 A071 00
Detection value adjustment
gain
n129 1.00 A075 1.00
MV: Adjust input level of target value
MX: Set percentage of feedback value and
display it on monitor d004.
Proportional gain(P) n130 1.0 A072 1.0
Integral time (I) n131 1.0 A073 1.0
Differential time(D) n132 0.00 A074 0.0
PID Offset adjustment n133 0 ――― ―――
Integral(I) upper limit value n134 100 ――― ―――
PID first-order primary delay
time constant
n135 0.0 ――― ―――
Feedback loss detection
selection
n136 0 ――― ―――
Feedback loss detection
level
n137 0 C044 3.0
Feedback loss detection
level
n138 1.0 ――― ―――
MV: Execute the operation selected on
n136 when the status of less or equal
detection level set on n137 continues
longer than the time set up on n138.
MX: multi-function output terminal outputs
OD (PID deviation signal) when reaching
the level set on C044 (set multi function
output function “OD”).