Installation and Wiring
SECTION 3
3-1
Installation
WARNING
Do not touch the conductive parts such as internal PCBs or terminal blocks
while power is being supplied. Doing so may result in electrical shock.
WARNING
Turn ON the input power supply only after mounting the front cover, terminal
covers, bottom cover, Operator, and optional items. Leave them mounted in
place while power is being supplied. Not doing so may result in electrical
shock, malfunction, or damage to the product.
WARNING
Wiring, maintenance, or inspection must be performed by authorized
personnel. Not doing so may result in electrical shock or fire.
WARNING
Wiring, maintenance, or inspection must be performed after turning OFF the
power supply, confirming that the CHARGE indicator (or status indicators) is
OFF, and after waiting for the time specified on the Inverter front cover. Not
doing so may result in electrical shock.
WARNING
Do not damage, pull on, apply stress to, place heavy objects on, or pinch the
cables. Doing so may result in electrical shock, operation stoppage, or
burning.
WARNING
Do not attempt to disassemble or repair the Unit. Doing either of these may
result in electrical shock, injury, or damage to the product.
Caution
Do not store, install, or operate the product in the following places. Doing so
may result in electrical shock, fire or damage to the product.
•
Locations subject to direct sunlight.
•
Locations subject to temperatures or humidity outside the range specified
in the specifications.
•
Locations subject to condensation as the result of severe changes in
temperature.
•
Locations subject to corrosive or flammable gases.
•
Locations subject to exposure to combustibles.
•
Locations subject to dust (especially iron dust) or salts.
•
Locations subject to exposure to water, oil, or chemicals.
•
Locations subject to shock or vibration.
Caution
Do not allow foreign objects to enter inside the product. Doing so may result in
fire or malfunction.
Caution
Do not apply any strong impact. Doing so may result in damage to the product
or malfunction.
Caution
Be sure to wire correctly and securely. Not doing so may result in injury or
damage to the product.
Caution
Be sure to firmly tighten the screws on the terminal block. Not doing so may
result in fire, injury, or damage to the product.
Caution
Carefully handle the product because it uses semiconductor elements.
Careless handling may result in malfunction.
Caution
Take appropriate and sufficient countermeasures when installing systems in
the following locations. Not doing so may result in equipment damage.
•
Locations subject to static electricity or other forms of noise.
•
Locations subject to strong electromagnetic fields and magnetic fields.
•
Locations subject to possible exposure to radioactivity.
•
Locations close to power supplies.
32
Summary of Contents for 3G3MV-P10CDT-E
