Installation
39
5
INSTALLATION
Rack installation
Delivery includes two 19“ rack mounting brackets for
installation on the side panels of the console. To attach
the brackets, remove the screws holding the left and
right side panel. Then use these screws to fasten the
two mounting brackets at the left and right sides of the
housing. The console can now be mounted in a 19” rack.
Please allow for proper air flow around the unit in order
to avoid overheating.
Cable connections
The consoles offer numerous, highly flexible possibilities
for balanced or unbalanced connection of professional
audio equipment. To avoid interfering noise, switch off
the mixer or set the channel and main faders to
minimum prior to connecting and disconnecting
equipment. Be sure to use only high-grade cables. The
illustrations below show the wiring of these cables.
Cable connections
Fig. 5.1 Footswitch connector
Audio connections
You can use standard RCA cables to wire the 2-TK/USB
inputs and outputs.
Fig. 5.2 XLR connections
Caution!
You must never use unbalanced XLR
connectors at the MIC input jacks if you want to use the
phantom power supply.
Fig. 5.3 6.3 mm mono plug
