Omnitronic 1422FX User Manual Download Page 28

Operating Determinations 

 

  

 

28

OPERATING DETERMINATIONS 

 

Power Supply 

• 

This  product  is  allowed  to  be  operated  with  an 
alternating  current  of  100-240  V,  50/60  Hz  and  was 
designed  for  indoor  use  only.  The  occupation  of  the 
connection cables is as follows: 

 

Cable 

Pin 

International 

Brown 

Live 

Blue 

Neutral 

Yellow/Green  Earth 

 

 

• 

The  earth  has  to  be  connected!  If  the  device  will  be 
directly connected with the local power supply network, 
a  disconnection  switch  with  a  minimum  opening  of  3 
mm at every pole has to be included in the permanent 
electrical  installation.  The  device  must  only  be 
connected  with  an  electric  installation  carried  out  in 
compliance  with  the  IEC  standards.  The  electric 
installation  must  be  equipped  with  a  Residual  Current 
Device (RCD) with a maximum fault current of 30 mA. 

Installation 

• 

Do  not  shake  the  device.  Avoid  brute  force  when 
installing  or  operating  the  device.  When  choosing  the 
installation  spot,  please  make  sure  that  the  device  is 
not  exposed  to  extreme  heat,  moisture  or  dust.  There 
should  not  be  any  cables  lying  around.  You  endanger 
your own and the safety of others! 

Taking into Operation 

• 

Operate  the  device  only  after  having  familiarized  with 
its  functions.  Do  not  permit  operation  by  persons  not 
qualified  for  operating  the  device.  Most  damages  are 
the result of unprofessional operation! 

Ambient Conditions 

• 

The ambient temperature must always be between     -
5°  C  and  +45°  C.  Keep  away  from  direct  insulation 
(particularly in cars) and heaters. The relative humidity 
must not exceed 50 % with an ambient temperature of 
45° C.  

• 

This  device  must  only  be  operated  in  an  altitude 
between -20 and 2000 m over NN.  

• 

Never  use  the  device  during  thunderstorms.  Over 
voltage  could  destroy  the  device.  Always  disconnect 
the device during thunderstorms. 

• 

This  device  must  never  be  operated  or  stockpiled  in 
surroundings where splash water, rain, moisture or fog 
may  harm  the  device.  Moisture  or  very  high  humidity 
can  reduce  the  insulation  and  lead  to mortal  electrical 
shocks. 

• 

When  using  smoke  machines,  make  sure  that  the 
device is never exposed to the direct smoke jet and is 
installed  in  a  distance  of  0.5  meters  between  smoke 
machine and device.  

Serial Barcode 

• 

Never  remove  the  serial  barcode  from  the  device  as 
this would make the guarantee void. 

Transport  

• 

Please use the original packaging if the device is to be 
transported. 

Cleaning and Service 

• 

Disconnect  from  mains  before  cleaning!  Never  use 
solvents or aggressive detergents in order to clean the 
device! Rather use a soft and damp cloth. 

• 

There  are  no  serviceable  parts  inside  the  device 
except  for  the  fuse.  Maintenance  and  service 
operations  are  only  to  be  carried  out  by  authorized 
dealers! Should you need any spare parts, please use 
genuine parts. 

Modifications and Guarantee 

• 

Please consider that unauthorized modifications on the 
speaker system are forbidden due to safety reasons!  

• 

If  this  device  will  be  operated  in  any  way  different  to 
the  one  described  in  this  manual,  the  product  may 
suffer  damages  and  the  guarantee  becomes  void. 
Furthermore, any other operation may lead to dangers 
like short-circuit, burns, electric shock, etc.  

WEEE Directive 

If  the  units  are  to  be  put  out  of  operation 
definitively,  take  them  to  a  local  recycling  plant 
for  a  disposal  which  is  not  harmful  to  the 
environment.  Do  not  dispose  of  as  municipal 
waste.  Contact  your  retailer  or  local  authorities 
for more information. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

Summary of Contents for 1422FX













































Reviews: