background image

The 

Management Options

 screen will be displayed.

PI

SA

Management Options

iConverter, Serial Agent

 Network Management

 1:  Chassis and Module Management

 2:  Set Module Identifier

 Management Module Preferences

 3:  IP and Control Preferences

 4:  SNMP Preferences

 5:  Abandon Preference Changes

 6:  Save Preference Changes

 7:  Restore to Factory Defaults

 8:  Restart Management Module

 9:  Other Networking Features

 Management Module Maintenance

 10: Firmware Update

 11: Set Date/Time

 IP Address     = 192.168.1.220

 Chassis Number = 1

Enter Choice, (H)elp, E(x)it >

A new 2GXM module does not have a password, and will skip the 

Password Entry

 screen and go straight

to the 

Management Options

 screen.  If a password has been set, the 

Password Entry

 screen will be displayed.

Type the password and press <

ENTER

>, the 2GXM will respond with the 

Management Options

 screen.

PI

SA

Omnitron Systems Technology, Inc.                iConverter, Serial Agent

Copyright 2001-2007 OST, Inc.                                   Password Entry

------------------------------------------------------------------------------

Omnitron Systems Technology

Technical Support:

(949) 250-6510

140 Technology #500

Sales/Products:

(800) 675-8410

Irvine, CA 92618

On the web at:

www.omnitron-systems.com

------------------------------------------------------------------------------

IP Address

192.168.1.220

MAC

00:00:00:00:00:00

[xxxxxxxx]

Please enter the password >

Page 11

Summary of Contents for iConverter 2GXM













































Reviews: