[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 8
FIGURE 6.
FIGURE 7.
4
OMNICOMM TERMINAL CONNECTION
4.1 CONNECTION TO THE POWER SUPPLY CIRCUIT AND THE IGNITION KEY
Connection to the power supply circuit and the ignition key depends on the presence of a “ground switch”
in the vehicle and the ability to connect directly to the ignition key.
If you cannot connect to the ignition key to lock ignition on/o
ff
, it is recommended to connect to the vehicle
battery. Connecting directly to the battery is conducted according to Figures 62–64, listed for a vehicle not
equipped with a ground switch. Vehicles equipped with “ground switch” are connected the same way.
4.1.1 Connection to the power circuit of the vehicles, not equipped with a “ground switch”
For Omnicomm Pro
fi
2.0 Terminal and Pro
fi
2.0 WiFi Terminals
For vehicles not equipped with “ground switch”, connection to the power supply circuit and the ignition key
must be performed in accordance with Figure 53.
For Omnicomm Optim 2.0 Terminal
For vehicles not equipped with “ground switch”, connection to the power supply and the ignition key must
be performed in accordance with Figure 54.
For Omnicomm Light 2.0 Terminals
For vehicles not equipped with “ground switch”, connection to the power supply and the ignition key must
be performed in accordance with Figure 55.
