[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 24
FIGURE 24
6.9 INSTALLATION OF ACOUSTIC RADIATOR FOR THE OMNICOMM PROFI 2.0
AND PROFI 2.0 WIFI TERMINAL
The installation of acoustic radiator must be conducted inside the cabin of the vehicle.
Installation should take place on or under the sloping or horizontal surface of the front panel in the cabin
of the vehicle.
Installation of acoustic radiator should depend on the installation location and method of attachment.
6.9.1 Attaching acoustic radiator with screws (self-driving screws) on the open surface
When mounting with screws, drill the holes as shown in the picture on the installation site (Figure 26).
FIGURE 25
FIGURE 26
Dismantle the acoustic radiator rack by unscrewing the screws (Figure 26).
Install acoustic radiator on the prepared surface.
Secure the acoustic radiator on the surface using the screws, fastening it with nuts (Figure 27).
FIGURE 27
