[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 25
When mounting with self-driving screws, conduct assembly as shown in Figure 28.
FIGURE 28
6.9.2 Attaching acoustic radiator with glue on the open surface
Clean and degrease the surface upon which the acoustic radiator will be installed.
Dismantle acoustic radiator racks by unscrewing the screws.
Apply an even layer of glue on the acoustic radiator board and attach it to the surface of the installation
site (Figure 29).
FIGURE 29
Secure the radiator and allow adequate time for the hardening of the glue.
FIGURE 30
After installation, remove the protective covering from the acoustic radiator (Figure 30).
Attachment of the acoustic radiator with screws on the reverse side of the front panel.
1) On the installation site, drill holes as shown in Figure 31.
