[email protected] | Installation manual Omnicomm 2.0 terminals v2.2
7
.16 | 18
FIGURE 10
FIGURE 11
Connect the antenna connectors and “SIDE 1” and “SIDE 2” connectors.
4.2
0
.2 Connecting cables to the connectors of Omnicomm Pro
fi
2.0 and Pro
fi
2.0 WiFi Terminal using rubber cable inputs
Three rubber cable inputs are supplied with the product.
Place the cable wires that are attached to SIDE 2 connectors into the rubber cable input.
Place at
fi
rst the GSM antenna cable into another rubber cable input, and then 10 wires of the cable,
attached to “SIDE 1” connector.
At
fi
rst, place the GPS antenna cable into the third cable input, and then the remaining 10 wires of the
cable, attached to “SIDE 1” connector.
FIGURE 12
FIGURE 13
Place the cable inputs into special grooves and install the protective cover (see Section 7.1.1): Figures 12
and 13.
Connect the antenna connectors and “SIDE 1” and “SIDE 2” connectors.
