Omnia Omnia.9, Installation & User Manual, Page: 99 / 264

CHAPTER 12 |
82
FM MENU EXPERT MODE
MBC Speed
♦
The Attack speed and Release speed controls work in the same manner as their counterparts in the other sections of the
Omnia.9. However, the behavior of the multiband AGC compressors is also program-dependent.
♦
The Attack (coupled) control allows you to adjust the attack speed of all of the bands simultaneously by an equal amount.
♦
The Release (coupled) control allows you to adjust the release speed of all the bands simultaneously by and equal amount.
♦
The Speed (coupled) control allows you to adjust both the Attack speed and Release speed of all the bands simultaneously
by an equal amount.
♦
The Peak Sense (Coupled) control simultaneously adjusts the attack and release rates but in opposition to one another.
Sliding the control to the right increases the attack rate and slows the release rate, making it more peak sensitive. Sliding
the control to the left decreases the attack rate and speeds up the release rate, making it less peak sensitive.
The attack and release speeds of the multiband limiters are program-dependent and not adjustable.
MBC Delay
The Sidechain Delay feature is useful for both adding punch and managing the amount of low frequency power (while
increasing bass punch). This is an especially useful
“
trick
”
for maintaining apparent loudness when operating under MPX
Power regulations. Delay value can be coupled, and set from 0 to 40ms.