Omnia Omnia.9, Installation & User Manual, Page: 79 / 264

CHAPTER 11 |
62
FM MENU INTERMEDIATE MODE
MBC Speed
These controls allow you to adjust the attack and release times of the multiband compressor bands, either individually or for all
bands simultaneously using the “coupled” controls.
MB Thresholds
The Multiband Thresholds menu allows you to set the target for each of the Multiband AGC bands, target for the compression
for each of the Multiband AGC bands, as well as the threshold for each band of the Multiband Limiters. The total number of
bands available in the Multiband Thresholds section is determined by the number of bands of processing used in the Current
Preset.
♦
The AGC Target controls set the target output level of each band of the Multiband AGC. A lower setting provides a lower
output level, while a higher setting provides a higher output level. These controls have a range b12 and -12dB in
one-tenth dB increments.
♦
The Comp Target controls set the target compression level for each band of the Multiband AGC. A lower setting provides
less compression, while a higher setting provides additional compression. These controls have a range b18 and
-3dB in one-quarter dB increments.
♦
The Limiter Threshold controls determine at which point the Multiband Limiter acts upon the incoming audio for its
particular band relative to its corresponding AGC Target. For example, a setting of +6dB means that any peaks of less
6dB above the AGC Target level will not be processed by the limiter. These controls have a range b18 and 0dB in
one-tenth dB increments.