Omnia-6ex Use and Operation Manual – V: 1.20
98
Click “Save to Card” to permanently store the current scripts on the PC Card in one file. Click “Load from Card” to
retrieve previously saved scripts. To download the scripts for use in the processor without saving to the PC Card,
click “Apply” if further script editing will be done. Click “OK” to download the current scripts and close the Script
Editor window. Click “Cancel” to close the window, discarding any changes made since the last “Apply” or “Save
to Card.”
Note: If you have created Trigger Scripts and clicked “Apply” but not “Save to Card”, the Omnia will only
remember your scripts until you power it off.
Once the scripts are downloaded into the processor, they are executed when the appropriate logic transition occurs
on their assigned trigger input. Neither the Remote Control application nor the Script Editor need to be connected
for the trigger scripts to execute.
Note: When a trigger script is actually executed, any problems that may be encountered in the execution of it will
not be noted to the user.
Script Command Definitions
The scripting commands available for use with the Daypart Scheduler are listed in bold lettering (e.g., parts). Their
definitions (e.g., Displays the current daypart table) and usage examples are also listed. The commands have been
divided by general functions (Dayparts, Presets, System parameters, etc.). In use, a command is typed in and then
the enter or return key is pressed. If the command is executable (e.g., parts), then the command is run (e.g., a table
of the dayparts is displayed), otherwise the cursor simply moves to the next entry line.
Dayparts
parts
Displays the current daypart table
partadd <day> <time>
Adds a daypart to the daypart table.
The “day” parameter can be assigned the following days: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M-F, S-S, All. The
“time” parameter must be defined using the following format: <hour>:<min>:<sec><am | pm> . As an example,
typing Partadd Mon 5:00:00am <enter> commands the Omnia-6 to add a daypart on Monday at 5:00:00am.
partremove
Removes a daypart from the current daypart list.
Example: partremove Mon 5:00:00am <enter>
partload
Loads a daypart from the PC Card.
partsave
Saves the current daypart to the PC Card.
Presets
Note: After a preset is saved to the system, the Omnia knows them by their Index Number, not by their Preset Name.
Therefore, when selecting a preset, you use its index number. When saving presets, you use its name!
presets
Lists all the currently available factory and user presets by index #.
preset <preset index #> Selects the preset by index # from the list of available presets
Example: preset 21 <enter> commands the Omnia-6 to load preset number 21 in the index list.
delete <preset index #> Deletes a preset from the preset index list by its index number.
Example: delete 21 <enter> commands the Omnia-6 to remove preset number 21 from the index list.
